爆米花机操作说明
使用说明
Manual Book
I . Important Safeguards
1. Read all instructions before using your popcorn machine
2. Do not touch hot surfaces. Always use the handles or knobs to operate.
3. To avoid any risk of electrical shock, do not immerse cord or plug into water or other liquid.
4. Close supervision is necessary when it is being used near children.
5. Unplug main power cord from outlet while no in use and before cleaning.
6. Allow hot parts to cool down before moving.
7. Do not operate the appliance with damaged cord or plug, malfunction or with any mechanical
damages.
8. Send the unit to the nearest authorized service center for examination and repair (ONLY
technicians should open up the unit).
9. It may cause injury by using any accessories or attachment not provided or recommended by
manufacturer.
10. Do not pop the kernels with a dry pot (without oil).
11. Do not immerse popping pot into water.
12. Pot surface is HOT and should not be touched during popping or just after use.
13. Unplug clean and cover the unit and store in a dry and safe place if not being used for long
periods of time.
14. Do not leave power cord hanging over edge of table or counter.
15. Do not place the unit on or near a hot gas or electric burner or in a heated oven.
16. Extreme caution must be paid when moving the appliance containing hot oil or other hot
liquids.
17. Turn all switches to “OFF” position before disconnecting power plug from the wall supply
outlet.
18. Not recommended for outdoor use.
19. Do not use appliance for anything other than the indicated usage.
20. To avoid overheating, always have oil and kernels ready before operating.
21. Extreme caution must be used when unloading heat pot, always use oven mitt.
22. Always place the unit over a counter-top so that residual hot oil or water running out will not
cause injury.
23. Heep out of reach of children.
24. Do not clean using any abrasive material.
25. Never force any parts or brackets into position.
26. No parts are intended for the dishwasher.
27. Save these instruction for future reference.
28. For household use only.
II. Operating Procedure
1. Place the corn popper on a fry, level surface. Protect from rain and other weather elements. Do
not install near pool or water outlets. Plug the unit into suitable grounded electrical outlet.
(please check if the outlet voltage is matching with rating label specified next to the power
cord).
2. Main unit has 3 function switches: spot light & warmer, stirrer, pot heater.
3. Hook the stainless steel pot onto the hanger of the main unit. (Note: Roller bar should be on the
door side and also check if gears between pot and ceiling are perfectly matched.)
4. Plug in the power cord (hanging from the main unit ceiling) into the bottom of the stainless
steel pot.
5. Switch the light and heater to ON. Popping pot should be pre-heated for 3 to 5 minutes. Cut off
top of oil section on pouch and squeeze oil into pot. Allow a fw minutes to melt oil. If using
other suitable ingredients, have pre-measured portions ready in advance. Add oil. (Max. 15G /
48oz. oil).
6. Next using suitable ingredient, have pre measured portions ready in advance. (8 oz. Max.
Uncooked popcorn kernels). Add popcorn, caution: lid is hot, recommended wearing oven
mitten to touch metal pieces. Close lid.
7. Switch the stirrer to ON so that it starts stirring.
8. Close the door on the main unit carefully.
9. Popcorn starts popping out through the lid after about 2 to 3 minutes.
10.Wen popping stops (no more popping sound form pot), switch the stirrer and heater to OFF,
popping is completed. Rotate the roller bar on the pot and pour out all remaining popcorn.
Gently shake if necessary.
11. Heater switch must remain OFF if the unit is not popping. Only the spot light warmer should
be left ON, this will keep the popcorn warm, dry and tasty for a longer period of time.
12. Serve popcorn with scoop provided. Note: do not add butte or other liquid flavoring in main
unit popcorn bin. Avoid a big mess! Remove popcorn to suitable serving bowl or popcorn
before adding this type of flavoring.
13. Always remove plug from power supply before cleaning and of the unit is not being used for a
period time.
III. Technical Parameters
Model |
Volt./ Freq. |
Power |
Dim |
Temp. |
YB-826A |
220v, 50hz |
1.4kw |
500*360*650mm |
30-250 |
MAIKEKU INTERNATIONAL GROUP CO.,LTD
Dongguan Maikeku Industrial Co., Ltd.
Foshan Thakon Refrigerating Machinery Co., Ltd.
Factory Address: No. 1, Shaxi Road, Shahukou Village,
Changping Town, Dongguan City, Guangdong Prov., P.R.C.
Branch Office Address: Room 801-809, Fuwei Bldg., Guangfo Rd.,
Nanhai Dist., Foshan City, Guangdong Prov., P.R.C.
Tel. No.:0086-757-89955297, Fax: 0086-757-89955740
Website: www.mkkchina.com
WARRANTY CARD
SALER |
BUYER |
SALES NAME: |
BUYER NAME: |
CONTACT PERSON: |
MODEL: |
TEL/FAX: |
BUYING DATE: |
MOBILE PHONE: |
CONTACT WAY: |
|
Notes: , |
1. Please read and keep the WARRANTY CARD well. |
2. The buyers have 1 year free warranty after the buying date. |
3. Please don’t change Phase of the machine to avoid serious faults of machine. |
4. Please check power regularly. The earth line should be reliably connected. Avoid phase lacks
and too high or too low voltage. |
5. Please keep the body of machine clean. Provide good working environment for machine.
Check machine working station regularly. |
6. The warranty will be stopped if the situations below happen. |
A. Machine is used abnormally, transported improperly under too hot or too low temperate
environment, exposed under wet environment. |
B. Machine is changed, overused and fix wrongly without permission of factory. |
7. Please inform machine supplier or service departments when abnormality is founded on
machine. |
8. The wearing parts changed in amendment belongs THAKON COMPANY. |
9. When service articles are changed, we beg for not informing every buyer. |
Dongguan Maikeku Industrial Co., Ltd.
|
WARRANTY CARD (COPY) |
BUYER NAME: TEL: MODEL: |
ADD: |
PRODUCING NO.: BUYING DATE: |
MENDING DATE: SIGNATURE: |
REASONS OF FAULTS AND CHECKING RESULT:
|
|